Filter
Top Products
11
For example, if you have call waiting,
press
FLASH
to take an incoming call
without disconnecting the current call.
FLASH
appears. Press
FLASH
again
to return to the first call.
Notes:
• If you do not have special phone
services, pressing
FLASH
might
disconnect the current call.
• The redial memory does not store
a
FLASH
entry or any digits
entered after you press
FLASH
.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Set
TONE/PULSE
on the base to
PULSE
.
2. Dial the service’s main number.
3. When the service answers, press
*
on the keypad.
A
appears on the
display. Then dial the additional
numbers. The phone sends these
numbers as tone signals.
4. When you complete the call, place
the handset on the cradle or press
TALK
to disconnect the call. The
phone automatically resets to the
pulse mode.
Note:
We recommend you not use
RE-
DIAL
to dial numbers that include a
tone (
*
) entry.
USING PAGE
The
PAGE
feature allows someone at
the base to page you at the handset. It
also helps you find the handset if you
misplaced it.
With the handset’s power on, the
handset beeps four sets of two beeps
when you press
PAGE
on the base.
The
TALK
key on the handset flashes,
and the channel number and
INT
ap-
pear on the display.
Note:
The handset will not beep during
a call.
MEMORY DIALING
You can store up to 30 phone numbers
for quick and easy dialing. Each stored
number can be up to 16 digits long.
43-1032.fm Page 11 Tuesday, August 17, 1999 9:41 AM