Filter
Top Products
20
Operation
If you have recorded an OGM
, the TAD beeps and
announces, “Answer on.”
Note:
Pushing
#
again (once a message has been
recorded) sets the TAD to Answer-Off.
4. Hang up or enter other remote commands.
Using Remote Commands
Follow these steps to operate the TAD from a touch-tone phone
or a pulse (rotary) phone with a pocket tone dialer.
1. Dial your phone number.
2. When the TAD answers, enter your remote operation secu-
rity code. The TAD beeps once to confirm that you entered
the correct code.
Notes:
• If you do not enter each digit of the security code within
8 seconds, the TAD hangs up.
• Even if the TAD is not set to answer calls, it will answer
after about 10 rings.
3. Enter a remote command (see “Remote Commands” on
Page 21).
4. When you finish, simply hang up.