Filter
Top Products
11
Preparation
1. Hold down
SET
until the TAD beeps. The TAD announces,
“Sunday,” and
34
3434
34
appears.
Note:
If necessary, slide
VOLUME
on the right side of the
TAD to the desired listening level.
2. To change the day of the week, repeatedly press
CODE/
REPEAT
to move backward or
MEMO/SKIP
to move forward
until the TAD announces the desired day of the week.
3. Press
PLAY/STOP
. The TAD beeps once, then displays the
current set hour and announces either “AM” or “PM.”
4. Repeatedly press
SKIP/MEMO
or
CODE/REPEAT
until the
TAD displays the desired hour.
Note:
The TAD changes the AM/PM setting each time it
reaches
45
4545
45
.
5. Press
PLAY/STOP
. The TAD beeps once to confirm the hour
setting.
6. To change the minutes, repeatedly press
CODE/REPEAT
or
SKIP/MEMO
until the desired minute appears.
7. Press
PLAY/STOP
to confirm the settings. The TAD beeps
and announces the day and time.
Note:
To check the current day and time at any time, press
SET
.
RECORDING AN OUTGOING MESSAGE
Before you can set the TAD to answer calls, you must record
the outgoing message (OGM) the caller hears when the TAD