Filter
Top Products
9
Mounting the Base
Directly on a Wall
For this mounting method, you need two
wood screws (not supplied) with heads
that fit into the keyhole slots on the bot-
tom of the base.
1. Drill two holes 3
15
/
16
inches apart. Then
thread a screw into
each hole, letting the
heads extend about
5
/
16
inch from the wall.
2. Plug one end of the supplied modu-
lar cord into the
TEL LINE
jack on the
back of the base.
3. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack on
the back of the base.
4. Route the modular and adapter’s
cords through the grooves on the
bottom of the base.
5. Plug the adapter into a standard AC
outlet.
3
15
/
16
5
/
16
5
/
16
PULSE-TONE
DC IN 9V
TEL LINE
43-1053.fm Page 9 Tuesday, August 17, 1999 1:26 PM