Filter
Top Products
16
Installation
2. Place the headset on your head
with the earpiece over either ear.
3. Adjust the headset band until it
rests with almost no pressure on
your ear and the top of your head.
If the headset is loose, press in
slightly to tighten it. If it is tight,
gently pull the headset band out to
loosen it.
4. Hold the headset in place and
adjust the microphone boom until it
is about even with (but not in front
of) your mouth. Experiment until
you find the most comfortable posi-
tion.
!
!!
! Ô
If desired, use the lapel clip on the
headset cord to attach the cord to your
clothing. Leave enough slack in the
cord so you can move your head
without pulling the headset.
!
CAUTION
!
The microphone boom
swivels on the headset.
Do not bend the
microphone boom while
you adjust it.
Ô
NOTE
Ô
When you are not using
the headset, place it on
the headset hanger.
Otherwise (if you set it
on a flat surface, for
example), you might
have to repeat these
adjustments.
43-3906.fm Page 16 Friday, February 14, 2003 10:41 AM