Filter
Top Products
Preparation
8
TURNING THE SYSTEM ON/
O
FF
To turn on the system, press ON/OFF/
STOP
. The display lights and the
system sounds a tone. The system is
set to answer calls.
To turn it off, press
ON/OFF/STOP.The
display turns off and the system sounds
2 tones.
ADJUSTING THE VOLUME
Push down or pull up VOLUME /
to increase or decrease the volume.
The system sounds a tone when you
change the volume.
SETTING THE DAY AND TIME
The day/time voice stamp automatically
defaults to Monday, 12:00 AM when
you connect the system to power.
1. Turn on the system. Hold down
SKIP/TIME SET/CHECK. The
system sounds a tone after 1
second.
2. While holding down
SKIP/TIME
SET/CHECK
,pressREPEAT/ANNC/
DAY
. The system announces
“Monday” and
01 appears on the
display. Repeatedly press
REPEAT/
ANNC/DAY
until you hear or see the
correct day.
Ô NOTE Ô
Hold down SKIP/
TIME SET/CHECK
continuously for Steps
1–4.