Filter
Top Products
18
Remote Operation
bottom of the system. Enter the security
code after the system answers and
sounds two tones. Within 7 seconds,
enter one of the remote commands.
OPERATING THE SYSTEM
FROM A REMOTE LOCATION
Dial your phone number. Even if the
system is off, it will turn on and answer
after about 10 rings. After the system
sounds a tone, enter your remote
operation security code. Enter a remote
command (see “Remote Commands”
on Page 18). When you finish, press
5#
to end remote access.
REMOTE COMMANDS
Press To
1# Play new messages.
2# Play all messages.
3# Delete the current message.
4# Repeat a previous message.
5# Stop and exit.
6# Skip a message.
7# Turn on/off the system.
8# Record an outgoing message.
9# Record a memo.
0# Monitor the room.
Ô NOTE Ô
When listening to
messages in remote
mode, there is a
pause during
playback every 2
minutes and 40
seconds. Press
0–9,
#,or∗ to continue
playing the message.