Filter
Top Products
7
Note:
Contact your local phone company to
subscribe to Caller ID with Call Waiting ser-
vices.
CALLER ID MESSAGES
DELETING CALLER ID
RECORDS
Follow these steps to delete an individual
Caller ID record.
1. Press
6REVIEW7
to recall the record.
2. Press
DELETE
.
:[bý9?:ýH[YehZ5ý
:[bý9?:ýH[YehZ5ý:[bý9?:ýH[YehZ5ý
:[bý9?:ýH[YehZ5ý
flashes.
3. Press
DELETE
again to delete the
record.
Follow these steps to delete all Caller ID
records.
1. Press
6REVIEW7
.
2. Press
DELETE
.
:[bý9?:ýH[YehZ5
:[bý9?:ýH[YehZ5:[bý9?:ýH[YehZ5
:[bý9?:ýH[YehZ5
flashes.
3. Press
REVIEW7
until
:[bý7bbý9?:5
:[bý7bbý9?:5:[bý7bbý9?:5
:[bý7bbý9?:5
flashes.
4. Press
DELETE
.
Deý9 Wbbi
Deý9 WbbiDeý9 Wbbi
Deý9 Wbbi
appears.
Follow these steps to delete a CID and voice
message.
1. Press
6REVIEW7
to recall the CID
record and voice message.
2. Press
DELETE
.
:[býLe_Y[ýCI=5
:[býLe_Y[ýCI=5:[býLe_Y[ýCI=5
:[býLe_Y[ýCI=5
flashes.
3. Press
REVIEW7
until
:[b
:[b:[b
:[b
9?:
9?:9?:
9?:+Le_Y[5
Le_Y[5Le_Y[5
Le_Y[5
flashes.
4. Press
DELETE
to delete the CID record
and voice message.
Notes:
• If you decide not to delete the records,
do not press
DELETE
and wait until the
system resets to answer calls.
• If you press
DELETE
to confirm deletion
during
:[b
:[b:[b
:[b
7bb
7bb7bb
7bb
9?:5
9?:59?:5
9?:5
, all Caller ID records
will be deleted, including records that
have not been reviewed.
6417$.'5*116+0)
We do not expect you to have any problems
with your system, but if you do, try these sug-
gestions.
CARE
Keep the system dry; if it gets wet, wipe it dry
immediately. Use and store the system only
in normal temperature environments. Handle
the system carefully; do not drop it. Keep the
system away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it
looking new.
Modifying or tampering with the system’s in-
ternal components can cause a malfunction
and might invalidate its warranty and void
your FCC authorization to operate it. If your
system is not performing as it should, take it
to your local RadioShack store for assis-
tance. If the trouble is affecting the telephone
lines, the phone company can ask you to dis-
Display
English/
Spanish
Description
D[mýJejWb
D[mýJejWbD[mýJejWb
D[mýJejWb
Dk[leýJejWb
Dk[leýJejWbDk[leýJejWb
Dk[leýJejWb
The number of new calls and
total number of incoming
calls.
ç&'
ç&'ç&'
ç&'
Call information is stored in
Caller ID memory location
#01.
Fh_lWj[
Fh_lWj[Fh_lWj[
Fh_lWj[
Fh_lWZe
Fh_lWZeFh_lWZe
Fh_lWZe
Appears when the caller has
blocked Caller ID information
from being sent.
KdWlW_bWXb[
KdWlW_bWXb[KdWlW_bWXb[
KdWlW_bWXb[
<k[hWýZ[ýPedW
<k[hWýZ[ýPedW<k[hWýZ[ýPedW
<k[hWýZ[ýPedW
Appears when the caller is
not within a Caller ID service
area. No caller information
appears.
9?:ýdejý
9?:ýdejý9?:ýdejý
9?:ýdejý
WjjWY^[Z
WjjWY^[ZWjjWY^[Z
WjjWY^[Z
9?:ýDeý7dWZ_h
9?:ýDeý7dWZ_h9?:ýDeý7dWZ_h
9?:ýDeý7dWZ_h
The voice message does not
have Caller ID message
information.
;hheh
;hheh;hheh
;hheh
Appears if there was an error
during the transmission of the
Caller ID information.
Deý9Wbbi
Deý9WbbiDeý9Wbbi
Deý9Wbbi
DeýBbWcWZW
DeýBbWcWZWDeýBbWcWZW
DeýBbWcWZW
No call information is stored
in the Caller ID.
F_YakfýF^ed[
F_YakfýF^ed[F_YakfýF^ed[
F_YakfýF^ed[
B[lWdjWhýJ;B
B[lWdjWhýJ;BB[lWdjWhýJ;B
B[lWdjWhýJ;B
Appears after the system
dials a number when you
press CALLBACK.
7H;7ýF?Dý
7H;7ýF?Dý7H;7ýF?Dý
7H;7ýF?Dý
:7OUMA
:7OUMA:7OUMA
:7OUMA
7H;7ýF?DýI[c#
7H;7ýF?DýI[c#7H;7ýF?DýI[c#
7H;7ýF?DýI[c#
WdW
WdWWdW
WdW
Prompts you to set the area
code, remote security opera-
tion PIN, date and day.
Appears when the system or
CID is inactive and a mes-
sage is waiting (if you sub-
scribe to your phone
company’s message waiting
service).
9WbbýM W_j_d]ý
9WbbýM W_j_d]ý9WbbýM W_j_d]ý
9WbbýM W_j_d]ý
BbWc$[dý;if[hW
BbWc$[dý;if[hWBbWc$[dý ;if[hW
BbWc$[dý;if[hW
Appears when there is an
incoming call when you are
on the phone.
C[cehoý_iý<kbb
C[cehoý_iý<kbbC[cehoý_iý<kbb
C[cehoý_iý<kbb
C[ceh_WýBb[dW
C[ceh_WýBb[dWC[ceh_WýBb [d W
C[ceh_WýBb[dW
Appears when the Caller ID
memory is full or the system
reaches its maximum mes-
sage counter.
;dZýe\ýB_ij
;dZýe\ýB_ij;dZýe\ýB_ij
;dZýe\ýB_ij
<_dýZ[ýBWýB_ijW
<_dýZ[ýBWýB_ijW<_dýZ[ýBWýB_ijW
<_dýZ[ýBWýB_ijW
Appears when you have
reached the end of your call
records.
HFJ
HFJHFJ
HFJ
Appears when you review a
Caller ID record from some-
one who has called more
than one time from the same
number.
9Wbbý<ehmWhZ
9Wbbý<ehmWhZ9Wbbý<ehmWhZ
9Wbbý<ehmWhZ
BbWcýI_]k_[dj[
BbWcýI_]k_[dj[BbWcýI_]k_[dj[
BbWcýI_]k_[dj[
The call was forwarded from
a number set to forward all
calls.
<ehmWhZý8kio
<ehmWhZý8kio<ehmWhZý8kio
<ehmWhZý8kio
EYkfWZeý
EYkfWZeýEYkfWZeý
EYkfWZeý
7Z[bWdj[
7Z[bWdj[7Z[bWdj[
7Z[bWdj[
The call was forwarded from
a number set to forward a call
if the line is busy.
L?Fý7b[hjýEd
L?Fý7b[hjýEdL?Fý7b[hjýEd
L?Fý7b[hjýEd
7b[hjWýL?FýEd
7b[hjWýL?FýEd7b[hjWýL?FýEd
7b[hjWýL?FýEd
The VIP alert feature is on.
L?FýdejýI[j
L?FýdejýI[jL?FýdejýI[j
L?FýdejýI[j
L?Fýdeý7`kijWZe
L?Fýdeý7`kijWZeL?Fýdeý7`kijWZe
L?Fýdeý7`kijWZe
Alerts you during reviewing
VIP calls that the mailbox has
no VIP number set.
MW_j _d]
MW_j _d]MW_j_d]
MW_j _d]
;dý;if[hW
;dý;if[hW;dý;if[hW
;dý;if[hW
Appears when you press
STOP after you delete mes-
sages or Caller ID records.
Display
English/
Spanish
Description
Problem Suggestion
The incoming
message is
incomplete.
Be sure the memory is not
full.
The incoming
message is
unclear.
Be sure
9VOLUME8 is
set to the desired sound
level.
The system
does not
answer after
two, four, or
seven rings.
Be sure the system is set to
answer calls.
The system
does not
respond to the
remote opera-
tion security
code.
Make sure the phone you
use to dial the system is a
touch-tone phone, or use a
pocket-tone dialer.
Re-enter your remote opera-
tion security code, pressing
each number for 2 seconds.
Make sure the remote opera-
tion security code you
entered is correct, or try
entering the default code of
000. The remote operation
security code might have
reset to the default code due
to a power failure or a weak
backup battery.
The display is
blank.
The backup battery is weak.
Replace the battery (see
“Installing a Backup Battery”
on Page 2).
Make sure AC power is prop-
erly connected (see “Con-
necting the System” on
Page 2).
The system dis-
plays and
receives Caller
ID records but
does not oper-
ate.
Make sure the AC power is
properly connected. If AC
power fails, the system can
receive Caller ID records but
cannot operate using backup
battery power.