Filter
Top Products
Memory Dialing
25
6. Press
MEM or SELECT. The cursor
flashes indicating that the display is
ready for the number to be edited.
7. Use the number key,
/TONE/<, #/>,
PAUSE/REDIAL or CH/DELETE to edit
the phone number. The phone number
cannot exceed 20 digits.
If you don’t want to change the phone
number, skip this step.
8. Press
MEM or SELECT. If you changed
either name or phone number, a
confirmation display shows up. If it is
correct, press
VOL key to select
“
Yes” and press SELECT. You hear a
confirmation tone. The memory storage
is complete.
For example, if you store a name and
number into memory location number
01, the display shows ¨Memory01
Stored
¨. After about two seconds,
Select Memory screen is displayed.
9. Press
END to return to the standby
mode.
ERASING A STORED NAME
AND PHONE NUMBER
1. Press MEM, ¨Select Memory¨ is
displayed.
2. Press
VOL or VOL keys, or enter a
number (
0 - 9) to select the memory
location you would like to erase.
3. Press MEM or SELECT.
The screen appears with the memory
location number that you have selected
in the display.