Filter
Top Products
13
Telephone Setup
LCD Language
You can select ENGLISH, FRANÇAIS or ESPAÑOL
to be used in all screen displays.
Press MENU/SELECT to show the menu.
Press or to select >LCD LANGUAGE, then press
MENU/SELECT.
Press or to scroll through the choices.
Press MENU/SELECT to confirm your selection.
Set Date and Time
The answering system announces the day and time oftime of
the message prior to playing it. Before using the
answering system, set the date and time as follows. If you
subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. However, the
year must be correct so that the day of the week can be
calculated from the caller ID information.
Press MENU/SELECT to show the menu.
Press or to select >SET DATE/TIME, then press
MENU/SELECT.
Press the dialing keys (0-9) to enter a two-digit
number or press or until the screen displays the
correct value. Press MENU/SELECT to advance.
Repeat step 3 until the date and time are set.
n Note: If the date and time are not set, the system
announces, “Time and day not set,” before each message.
Clear Voicemail
If you subscribe to voicemail service offered by your telephone company,
when you have new voicemail messages, NEW VOICEMAIL and appear
on the handset, and the VOICEMAIL light on the telephone base flashes.
Contact your local telephone company for more information and assistance
about using your voicemail service.
After you have listened to all new voicemail messages, the indicators on
both the handset and telephone base turn off automatically.
Use the clear voicemail feature when the telephone indicates that there is
new voicemail but there is none (for example, when you have accessed your
1.
2.
3.
4.
1.
2.
3.
4.
CALL LOG
RINGER VOLUME
RINGER TONE
KEY TONE
>LCD LANGUAGE
CALL LOG
RINGER VOLUME
RINGER TONE
KEY TONE
>LCD LANGUAGE
LCD LANGUAGE
>ENGLISH
FRAN
C
AIS
ESPANOL
LCD LANGUAGE
>ENGLISH
FRAN
C
AIS
ESPANOL
RINGER VOLUME
RINGER TONE
KEY TONE
LCD LANGUAGE
>SET DATE/TIME
RINGER VOLUME
RINGER TONE
KEY TONE
LCD LANGUAGE
>SET DATE/TIME
SET DATE
12/25/08
MM/DD/YY
SET DATE
12/25/08
MM/DD/YY
SET TIME
11:10 AM
SET TIME
11:10 AM