Filter
Top Products
23
Using Hold, Conference,
Transfer and Intercom
Put a call on hold
Press
INT’COM/HOLD. If you leave a caller
on hold for more than ve minutes, the call
will be disconnected. To return to the party
on hold, press
/FLASH or .
Join a call in
progress
To join a call already in progress, press
/FLASH or . You can hang up
normally; the other station remains
connected to the call.
Transfer a call
Press INT’COM/HOLD; the call will
automatically be placed on hold. Use
or to select the station you want to
transfer the call to, and press the OK soft
key. (To page all stations at once, select
ALL.) When the other station answers,
you can talk to the station; the outside
call remains on hold. If the other station
accepts the call, you will be disconnected.
Cancel a transfer
To cancel the transfer and return to the
call, press
/FLASH or .
Accept a
transferred call
To answer the page and speak to the
transferring station, press /FLASH or
INT’COM/HOLD. To accept the call and
speak to the caller, press
/FLASH again.
UU01639BZ_1.indd 23 12/18/2006 11:09:43 AM