Filter
Top Products
3
2. The
A/B
switch lets you set the
switch polarity to match that of the
tape recorder used with the con-
trol. Set
A/B
to the position that
stops recording when you are not
using the phone line.
Start by setting
A/B
to
A
. Then put
a cassette tape into the recorder
and press the record button. If the
tape moves, set
A/B
to
B
. If the
tape did not move, leave
A/B
set
to
A
.
3. To test the control, lift the handset
of any phone on the telephone
line. The tape should start moving
and recording should begin. Hang
up the phone. The tape should
stop.
USING THE RECORDING
CONTROL
To record a call, set
RECORD/PLAY-
BACK
to
RECORD
. The recorder auto-
matically records all phone calls you
make and receive.
Illustration
Illustration
To stop recording, stop the recorder.
To play the cassette tape, set
RECORD/PLAYBACK
to
PLAYBACK
and follow the instructions in your tape
recorder’s owner’s manual to rewind
and play the tape.
CARE AND
MAINTENANCE
To enjoy your RadioShack Multi-
Phone Recording Control for a long
time:
• Keep the control dry. If it gets wet,
wipe it dry immediately.
• Use and store the control only in
normal temperature environ-
ments.
• Handle the control gently and
carefully. Don’t drop it.
• Keep the control away from dust
and dirt.
• Wipe the control with a damp cloth
occasionally to keep it looking
new.
Modifying or tampering with the con-
trol’s internal components can cause a
malfunction and might invalidate its
warranty. If your control is not per-
forming as it should, take it to your lo-
cal RadioShack store for assistance. If
the trouble is affecting the telephone
lines, the phone company can ask you
to disconnect your control until you
have resolved the problem.
43-1236.fm Page 3 Wednesday, August 18, 1999 9:05 AM