Filter
Top Products
Operation
27
DEL to delete a character. To
delete all characters, hold down
CH/DEL for at least 1 second.
6. Press SEL. Ijeh[
Ijeh[Ijeh[
Ijeh[ DkcX[h
DkcX[hDkcX[h
DkcX[h appears.
7. Enter the number and any tone
and pause entries (see “Using
Tone Services on a Pulse Line” on
Page 23 and “Entering a Pause”).
±
8. Press
SEL. The phone beeps and
C[ceho
C[cehoC[ceho
C[ceho d
dd
d Ijeh[Z
Ijeh[ZIjeh[Z
Ijeh[Z appears (d
dd
d =
number). After a few seconds,
C[ceho
C[cehoC[ceho
C[ceho Ijeh[
Ijeh[Ijeh[
Ijeh[ appears, and you
can repeat Steps 3–8 to store
more numbers.
To replace a stored number, simply
store a new one in its place.
'PVGTKPI"C"2CWUG
In some telephone systems, you must
dial an access code (9, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number; however, you should
also store a pause after the access
code to allow the outside line time to
connect.
±
"016'"
±
"
Each tone or pause
entry uses one digit of
memory.