Filter
Top Products
13
Installation
when the handset is on the base, even
if the battery pack is not connected.
1. Press down and slide off the
battery compartment cover.
2. Lift the battery pack out of the
compartment.
3. Plug the battery pack’s connector
into the socket in the compartment
(the connector fits only one way),
then place the battery pack in the
compartment.
4. Replace the cover.
To charge the battery pack, place the
handset on the base. The CHARGE/IN
USE indicator on the base lights and
JejWb0&&
JejWb0&&JejWb0&&
JejWb0&& appears on the handset
display.
Recharge the battery pack when
Be mý
Be mýBe mý
Be mý
8Wjj[ho
8Wjj[ho8Wjj[ho
8Wjj[ho
flashes on the display.
If you have trouble replacing the battery
pack, take the phone to your local
RadioShack for assistance.
Rý
4GEJCTIKPI"VJG"$CVVGT["2CEM
• The phone might not work and you
might hear an error tone when you
press
TALK/FLASH in any of the
following situations:
ý
R
"9#40+0)
ý
R
"
Dispose of the old
battery pack promptly
and properly. Do not
burn or bury it. See
“Recharging the Battery
Pack” for additional
information on proper
battery handling.