Filter
Top Products
21
.
USING PANIC
When an emergency occurs, you can
set the radio to generate an alarm
sound for safety. Ô
1. To activate the alarm sound, press
and hold
PANIC.ReleasePANIC
when the warning tone sounds and
the radio vibrates.
2. After the warning tone sounds and
and the radio vibrates (about two
seconds), the radio generates an
alarm sound.
3. To stop the alarm sound, press and
hold
PANIC until the alarm stops
and
“STOP” appears on the LCD.
Call Melody
No. ID
1 2 3 4 5
For Receiver
Group
Call
Sender
ID = 1~4
Sender
ID = 5~8
Sender
ID =
9~12
Sender
ID =
13~16
Ô NOTES Ô
• You can activate the
alarm even if the
radio is turned off
(rotary switch Off) or
the battery is
charging or the
battery is low.
• During the alarm and
vibration period,
press PANIC once to
stop the warning tone
and vibration.