Filter
Top Products
23
Troubleshooting
detected for 10 seconds, the radio
switches back to the channel last
selected, whether it was in Home mode
or in Travel mode. In Travel Mode, the
Weatheradio
is configured with the
following defaults:
Channel Selection — Auto
Alert Mode — Tone
Missed Alert Reminder — Off
Response Location — All Locations
TROUBLESHOOTING
If your Weatheradio
is not working properly, these suggestions
might help you eliminate the problem. If it still does not operate
properly, take it to your local RadioShack store for assistance.
Problem Suggestion
No power.
Make sure the AC adapter is
connected to the weatheradio or a
backup battery is installed.
No sound.
If the backup battery becomes weak,
your weatheradio might not sound a
tone when an alert is broadcast. Test
your weatheradio’s reception
periodically, and replace the battery if
the tone does not sound.
Multiple FIPS codes are stored, but
the weatheradio only responds to
weather alert broadcasts for one
code.
Make sure the weatheradio is set to
MULTIPLE LOC mode.
Make sure the FIPS codes stored in
memory are correct.