Filter
Top Products
10
Programming the Weatheradio‚
channel appear. AUTO appears and
the Weatheradio
beeps.
To manually search for channels,
press g when
MANUAL appears.
CHANNEL and the number of the
currently selected channels
appear. The Weatheradio
tunes
to a channel and turns on the
broadcast. To select another
channel, repeatedly press e or d
until the desired channel number
appears.
4. Press g to confirm the selection. A
beep sounds and CH, the number
of the currently selected channels,
and
SELECT (the newly selected
channel) appear. Then
SELECT CH
appears. Press MENU to exit.
SELECTING ALERT MODE
You can set the Weatheradio
to
respond to an NWS alert broadcast in
one of two ways:
TONE — The Weatheradio
sounds an
alert for five minutes or until End of
Message is received and an alert
description appears until the alert’s
effective time expires. To turn off the
alert sooner, press
WX. The