Filter
Top Products
O P E R ATION 2 –1 9
Primary Line
Press the PROGRAM key until you see:
1. Enter the line number you wish to be your Primary Line.
2. Press the PROGRAM key again to save and exit.
Caller ID On/Off
Press the PROGRAM key until you see:
1. Caller ID defaults to On, press
*
to turn it Off, or # to turn it On.
Note: If you do not
have Caller ID services
on the line, turning
Caller ID Off will
eliminate the message
“NO CALLER ID
MSG” on your LED
display.
2. Press the PROGRAM key again to save and exit.
Programming
2 –1 8 O P E R AT I O N
Telephone Number
Press the PROGRAM key until you see:
1. Select line 1, 2, or 3 on the key pad. (Selecting a LINE key under the LCD screen
will abort programming and make the selected line active). Any previously
programmed number will be displayed.
2. Enter the phone number
3. Press the PROGRAM key again to save and exit.
Repeat this process as desired for other lines.
LCD Contrast
Press the PROGRAM key until you see:
1. Use the VOL keys to adjust the LCD to the desired contrast.
2. Press the PROGRAM key again to save and exit.
LCD Contrast actually adjusts the optimal view angle for the LCD, depending on your
juxtaposition to the LCD. Experiment with raising and lowering your eye level while
adjusting the LCD, until you find the optimal setting.
Programming