Filter
Top Products
O P E R ATION 2 –1 7
Ring Volume
Press the PROGRAM key until you see:
1. Select line 1, 2, or 3 on the key pad (Selecting a LINE key under the LCD screen
will abort programming and make the selected line active).
2. When the Ring Volume bar is displaye d, use the V O L keys to adjust the audible ri n g .
3. Press the PROGRAM key to save and exit.
Repeat this process as desired for other lines.
Time of Day
Press the PROGRAM key until you see:
1. Enter the correct time.
2. Press the Program key again to save and exit.
Programming
2 –1 6 O P E R AT I O N
After the Speed Dial telephone number is entere d , the LCD screen will display (ex a m p l e ) :
Enter the 8 characters for the Speed Dial name using keys 2-9,
Note: Use
*
for
entering spaces,
or # for entering
hyphens, if desired.
When a number 2-9 is pressed, the alphabetic characters associated with that number
are displayed on the LCD with the first character flashing.
Pressing the same key again cycles through the characters associated with that key, in
order.
When the first letter of the name you wish to enter is flashing, press PROGRAM to
enter the letter. Press the next key 2-9 to locate the next letter in the name using the
same method. When the next desired letter is flashing, press PROGRAM again. Repeat
for all the letters. When up to 8 characters of the desired name appear on the LCD
screen, press PROGRAM twice to save the entry.
Programming