Filter
Top Products
Developer’s Guide SoundPoint IP / SoundStation IP
2 - 28
Call Line Information
The following format is supported:
<CallLineInfo>
<LineKeyNum> </LineKeyNum>
<LineDirNum> </LineDirNum>
<LineState>Active</LineState>
<CallInfo>
<CallState> </CallState>
<CallType> </CallType>
<CalledPartyName> </CalledPartyName>
<CalledPartyDirNum> </CalledPartyDirNum>
<CallingPartyName> </CallingPartyName>
<CallingPartyDirNum> </CallingPartyDirNum>
<CallReference> </CallReference>
<CallDuration> </CallDuration>
</CallInfo>
</CallLineInfo>
The following attributes are supported:
Note
The
<CallInfo>
block is included if and only if <LineState> is “Active”. Otherwise it
is not included.
Attribute Value/s Description
LineKeyNum number Registered phone line key
number.
LineDirNum number Registered line directory number.
LineState Active,
Inactive
Line state.
CallState Outgoing call states:
Dialtone, Setup,
RingBack
Incoming call states:
Offering
Outgoing/Incoming call
states: Connected,
CallConference,
CallHold, CallHeld,
CallConfHold,
CallConfHeld
Shared line states:
CallRemoteActive
Call state.
CallType Incoming, Outgoing Call type.