Developer’s Guide SoundPoint IP / SoundStation IP
2 - 24
When the telephone notification URI is set and the incoming call event is
enabled to gather information, the following example shows the transmitted
data for a call between two registered lines:
<PolycomIPPhone>
<IncomingCallEvent>
<PhoneIP>172.24.132.135</PhoneIP>
<MACAddress>0004f214b89e</MACAddress>
<CallingPartyName>20701</CallingPartyName>
<CallingPartyNumber>20701@172.18.186.94</CallingPartyNumber>
<CalledPartyName>20300</CalledPartyName>
<CalledPartyNumber>20300</CalledPartyNumber>
<TimeStamp>2008-07-11T13:19:53-08:00</TimeStamp>
</IncomingCallEvent>
</PolycomIPPhone>
Outgoing Call Event
The following format is supported:
<OutgoingCallEvent>
<PhoneIP> </PhoneIP>
<MACAddress> </MACAddress>
<CallingPartyName> </CallingPartyName>
<CallingPartyNumber> </CallingPartyNumber>
<CalledPartyName> </CalledPartyName>
<CalledPartyNumber> </CalledPartyNumber>
<TimeStamp> </TimeStamp>
</OutgoingCallEvent>
The following attributes are supported:
Attribute Value/s Description
Phone IP IP address IP address of the phone.
For example, “172.24.128.160”
MACAddress MAC address MAC address of the phone.
For example, “0004f214b8e7”
CallingPartyName name • If the line is registered and the
call is initiated from that line,
then the registered line display
name of the calling party is
shown.
• If the line is not registered and
the call is initiated from that
line, then IP address of the
calling party is shown.