Filter
Top Products
Sample Application Configuration Guide SoundPoint IP / SoundStation IP
3 - 4
The weather feed application is enabled by default. A 10 second refresh
interval is set by default.
This section provides information on the following topics:
• Adding Postal Code/City
• Enabling/Disabling Weather Feed
• Setting Refresh Interval for Weather Feed
• Weather Feed Display
Adding Postal Code/City
This option allows you to add of a new postal code or city.
To add a new location:
1. Press the Applications key.
2. Select the Add/Delete Weather link.
3. Enter a new location as a postal code or city code.
4. Press the Exit soft key.
Enabling/Disabling Weather Feed
This option allows you to enable or disable the weather feed in your phone’s
idle display.
To enable the weather feed on your phone:
1. Press the Applications key.
2. Select the Select Apps for Display link.
Note
If you do not want this application running on your phone, you must specifically
disable it yourself.
Note
For cities outside the United States, use the international city code, which can be
obtained from http://www.aspnetresources.com/tools/locid.aspx .
Note
You can delete any of the current locations.