Filter
Top Products
SoundStation
®
IP 4000 Quick Start Guide
Installation
Installing and Connecting to the Network
To install the SoundStation IP
4000 and connect it to the network,
complete the following steps:
1 Place the SoundStation IP 4000 on
a flat surface (such as a conference
room table or desktop), with a
power outlet and a data network
port nearby.
2 Connect one end of the 6 ft. data
cable to your data network port.
Connect the other end to the
network (LAN) port on the Power
Interface Module.
3 Connect the 25 ft. data cable to the
RJ-45 port on the bottom of the
SoundStation IP. (The other end of
this cable is pre-plugged into the
PIM.)
4 Connect the power adapter to the
AC adapter port on the PIM.
5 Plug the other end into a standard
electrical power outlet in the wall.