Polycom 500 Telephone User Manual


 
VoiceStation™ 500 - 15
2. When the incoming call ring is
heard, answer it as you normally
would.
Redialing the last dialed number in Wired
Audio Mode
Redial the last number using
the mobile phone or computer
connected to the VoiceStation™ 500.
Transferring audio between devices in
Wired Audio Mode
The connector cable (mobile phone
or computer) with 2.5 mm connec-
tor needs to be removed from the
mobile phone or computer.
Changing between calls in Wired Audio
Mode
The Mode button can be used to swap be
-
tween the POTS, Bluetooth and the Wired
Audio calls:
1. Making/Answering a POTS call
when in Wired Audio Mode: Press
the Mode button, press the On/Off
button, make/answer the phone call.
The Amber LED should not be lit.
When finished, press the On/Off
button, then press the Mode button
again.
2. Making/answering a Bluetooth call
when in Wired Audio Mode: Press
the Mode button, then make/answer
the phone call. The Bluetooth LED
should be on (blue). When finished,
press the Mode button again. The
LED should return to amber.
Muting a call on VoiceStation™ 500
1. Press the Mute button on the
VoiceStation™ 500 to mute/unmute
a call as described in the “POTS
Mode” section of this User Guide or;
2. The mobile phone Mute/Unmute
button can be used.
Changing Volume
1. Press the Volume Up/Down buttons
on the VoiceStation™ 500 to adjust
the volume to the desired level as
described in the “POTS Mode” sec
-
tion of this User Guide or;
2. Use the mobile phone to adjust the
volume.
Recording an audio call
Please refer to the ‘Record a Conver-
sation’ section of this User’s Guide
as described in the “POTS Mode”
section of this User Guide.
Disconnecting Wired Audio Mode on
VoiceStation™ 500
1. End the phone call as you normally
would.
2. Unplug the cable from the
2.5mm port on the side of the
VoiceStation™ 500. The amber
LED should turn off, bringing the
VoiceStation™ 500 to POTS mode.