Filter
Top Products
User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP
34 1725-36203-001-F.doc
• Open the Config menu
• Turn on the backlight
Turn the Handset On
Press and hold the END key until two chirps sound.
Turn the Handset Off
Press and hold the END key. One chirp will sound. If you are in a call,
hang up first, then turn off the handset.
Lock the Keypad
While in standby mode press the Lock softkey.
Unlock the Keypad
Press the Unlk softkey, then #.
Place a Call
1. To dial a number, follow any one of these sequences:
» Press the START key, wait for a dial tone, then dial the number.
» [Predial] Dial the number and then press the START key.
» Press the Spkr softkey, then dial the number.
2. Listen for the ring to indicate the alerting of the called party.
Note:
Line 1 is the default line
Place an Emergency Call
(SpectraLink 8030 Wireless Telephone only)
The large button on the left side of the SpectraLink 8030 Wireless
Telephone may provide you with either Emergency Dial or PTT as
determined and activated by the system administrator.