Filter
Top Products
User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP
32 1725-36165-001-G.doc
To set the handset for PTT vibrate only, enable PTT Vibrate and set the
tone volume to zero.
System Info
Displays the IP address of the highlighted menu item. The IP address
appears in the upper portion of the screen below the words
System
Info
.
Phone IP Address
Displays the IP address currently assigned to the handset by the SVP
Server.
Alias IP Address
Displays the IP address used by the call server to send
communications to and from the handset via the SVP Server
SVP IP Address
Displays the IP address of the SVP Server.
OAI IP Address
Displays the IP address of the server used for custom applications
when defined on an Open Applications Interface (OAI) Server.
Firmware Version
Displays the software version running the handset. The MAC address
is the hardware identification number and is set at the factory. Three
code numbers correspond to the three software files that each
software version uses.
Emergency Dial
(SpectraLink 8030 Wireless Telephone only)
Emergency Dial will appear if it has been enabled by the system
administrator. The
Emergency Number/Name options allow you to
check the number and name that is dialed when the Emergency Dial
button is pressed.