Filter
Top Products
User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP
16 1725-36165-001-G.doc
Indicator Function
Audio receive-only icon (flashing). Locally muted or far end hold with no
music on hold.
No audio icon. No audio is flowing. Call is terminating or far end hold with
audio disable.
Softkeys
Softkey Name Displayed during… Press to…
<< Cursor backward Entering a dial number. Move the cursor back one position.
>> Cursor forward Entering a dial number.
Move the cursor forward in
alphanumeric mode. If the cursor is
at the end of the line, adds a space
character.
Answ Answer
Incoming call on the selected
line.
Answer the call (equivalent to START
key).
Bksp
Backspace
character
Entering a dial number.
Delete the character prior to the
cursor position.
Back Back one screen Displaying a menu.
Exit the menu, move back one
screen.
Dial Dial Call
A dial number is being
entered on the selected line.
Initiate a phone call to the entered
dial number.
End End Call
An active call on the selected
line.
Terminate the call without going back
to standby mode.
Favr Favorites
Prior to entering the first
character of a dial number.
Activate the Favorites menu.
Fwd
Forwarding
Definition
Prior to entering the first
character of a dial number as
a call forwarding destination.
Initiate definition of a new call
forwarding destination.
Delete a previously defined call
forwarding destination.
Hold Hold In an active call.
Place the call on hold. The call status
tab shows
when the call is on
hold or
when audio is flowing.
Logs Call Logs Standby mode Open the Call Log menu.
Msg
2
Message
Initial dial screen when new
line is selected and a dial
tone is active prior to
entering first character of the
number to be dialed.
Initiate a call to the specified
message center contact address for
retrieval or administration of
voicemail.
Mute Toggle muting In an active call.
Toggle audio transmission to the far
end. The call status tab shows
when not muted or
when muted.
2
Appears only if the PROXYn_MAIL_NOTIFY is configured. A message center contact address must be defined for the proxy used
by the selected line.