Polycom 1725-36092-001 Telephone User Manual


 
28
Accessories
The Single and Dual Chargers allow the handset to remain operative in
speakerphone mode or with a headset while charging. Handsets may be
charged while in standby mode, while in an active call or while turned off.
Place the Single or Dual Charger on a flat, horizontal surface. Plug the
power supply into the charger and into an appropriate wall outlet. The
Quad Charger may be mounted on a horizontal or vertical surface.
Charging Status
The handset display and the LED on the Dual and Quad Chargers indi-
cate whether or not charging is occurring or completed or if a Battery
Pack failure has been detected.*
* Note: the Single Charger does not have an LED indicator.
Handset/LED Charging Status
Charging…
LED Solid On
The Battery Pack in the handset is charging.
Note that in the Dual Charger, the handset’s
Battery Pack takes charging precedence,
and when it is finished charging, the single
Battery Pack in the rear slot will charge.
Charge Complete
LED Off
The Battery Pack in the handset has finished
charging.
Battery Pack fully charged, empty slot, or
unit is not powered.
Battery Failure
LED Flash
Error. Battery Pack not able to be charged.
Reinsert Battery Pack or replace Battery
Pack.