Filter
Top Products
16
Getting Started
Place a call on hold
Press the Hold softkey.
Resume a held call
Press the LINE key followed by the line
number key.
Mute the
microphone
Press the Mute softkey.
End the call
Press the END key. Be sure to do this at the
end of each call to return to the standby
mode.
Change the profile
Press the Prof softkey and use the Nav keys
to select a new profile while in standby
mode. The selected profile is marked with
an asterisk (*).
Display additional
features
During a call or while off hook, press the
FCN key to display the options programmed
to additional features available in your
facility. These might include transfer,
conference, voicemail, etc.
Turn on the backlight
The backlight comes on when any key is
pressed or when there is an incoming call
and stays on for 10 seconds. It turns off
after 10 seconds if another key is not
pressed within that period.
If you want to Then