Filter
Top Products
14
Smart Sensor technology
Sensors detect whether or not you are wearing the headset. Sensors are located in the speaker
capsule on the microphone boom side.
Auto answer call:
When you are not wearing your headset.
When you have an incoming call on your mobile
or PC softphone, put on the headset and the call
will be answered automatically. You do not have
to press the call button.
Auto pause media:
When you are listening to media audio.
When you are listening to media audio from
your mobile phone, remove the headset and the
audio pauses. Place your headset back on and
the audio resumes.
Note If the media player has been playing
less than 10 seconds you will have to
manually restart the media player.
Note If the audio remains paused for more
than 5 minutes you will have to manually
restart the media player.
Note Auto pause media feature is only
available with your mobile phone. PC media
audio does not auto pause.
Auto transfer call:
Whether you are wearing your headset or not.
If you are not wearing your headset and you
answer an incoming call on your mobile phone,
the audio will be routed to the mobile phone.
When you put the headset on, the audio will be
automatically transferred to the headset.
If you are already wearing your headset and
there is an incoming call, the audio will be
routed to the headset and you will need to
press the mobile talk button to answer the call.
NOTE These features are enabled by default and can be disabled in the Plantronics Control Panel.
The Plantronics Spokes software must be downloaded to access the Control Panel. Changes to the
settings requires that you are connected to the PC. Load Plantronics Spokes software by visiting
plantronics.com/software and click “Download.”
Other features
Auto connect
When you are wearing your headset
Automatically connects headset to mobile
phone when Bluetooth headset is turned on
and within range of devices. Voice prompt will
announce you are connected.
Manual pairing If powered on, press and hold the mobile talk
button more than five seconds to power off the
bluetooth radio.
If powered off, press and hold the mobile talk
button until the button flashes red and blue.
Advanced features