Plantronics 58270000 Cordless Telephone User Manual


 
30
XLC3.4
Register
VoiceAsst
AutoTalk
Register
Deregister
Register
HoldBase
For5Secs
FINDKey
ThenPress
MENUKey
Registering...
Registration
Successful
HANDSET1
Deregistered
Handset
Needs
Registration
Register
Deregister
Register
REGISTERING THE XLC3.4
In order to use the XLC3.5HS (white color) or XLC3.5HSB
handset (dark grey color) (sold separately), you must register
it to the XLC3.4 base.
Pull the handset’s battery tab located on the bottom of
the device, and then press MENU to start registering or
deregistering your handset from your system.
TO REGISTER AN UNREGISTERED HANDSET
1. Press MENU to enter registration mode. You will see
displayed on the screen, “Handset Needs Registration.”
2. Press and hold the FIND key on the XLC3.4 base for ve
seconds, until the base visual ringer starts ashing. Release
FIND key on the XLC3.4 base.
3. Press MENU key on the handset.
4. The screen shows “Registering... ”, then “Registration
Successful” (accompanied by ve quick beeps).
5. Your handset is now registered to your XLC3.4 system.
Your screen will display “Handset X,” (where “X” is the
number of the actual handset registered, such as the second
or fourth handset, etc.).
You can extend the number of handsets by using additional
XLC3.5HS or XLC3.5HSB handsets (sold separately).
TO REGISTER YOUR HANDSET AGAIN (or to
register to a different XLC3.4 system)
1. In standby mode, press MENU.
2. Press DOWN arrow ve times to advance the row
reading “Phone Setup” to the top of the screen.
3. Press MENU to enter the setup section. The screen
displays “Register” on the screen’s top row now.
4. Press MENU to enter the Registration section.
5. Press MENU again to select “Register.”
6. Follow the Registration steps listed above.
TO DEREGISTER THE HANDSET
1. See the six steps listed above, then press MENU to select
“Deregister.”
2. Your handset will deregister from your base as
soon as you press MENU. The screen will show “Handset
X Deregistered”(again, where “X” is the number of the handset
registered), then “Handset Needs Registration.”
HANDSET REGISTRATION