Filter
Top Products
15
Use more of your phone
Enter 51. Press and hold until you see
BASE?.
Select the base using the digit keys (1, 2, 3 or
4). Press and hold to confirm.
If you see PIN?, enter the system PIN
(default 0000). Press and hold until you
see SEARCHING....
Press and hold on the base unit for 3
seconds.
• The base will turn on the LED for 30 seconds.
• If registration is successful, handset will show
REGISTERED.
Note
If registration was not successful, the handset will
show FAILED. Repeat the above procedures
and try again.
5.3.2 Select a base
If your handset is registered to more than 1 base,
you can select which base the handset will use.
You can choose a fixed base or you can allow the
handset to automatically search for a nearby
available base (AUTO base selection).
In standby mode:
Press and hold until you see MENU?.
Enter the base index number (see below).
Press and hold to confirm.
• If successful, handset will show the selected
base. Otherwise, handset will show FAILED.
5.3.3 Un-register a handset
A handset can un-register another handset
registered to the same base station. It cannot un-
register itself.
In standby mode:
Press and hold until you see MENU?.
Enter 52. Press and hold until you see
HANDSET?.
Enter the number of the handset you want to
unregister. Press and hold to confirm.
If you see PIN?, enter the system PIN
(default 0000).
Press and hold to confirm.
• If un-registration is successful, your handset will
show DELETED.
5.3.4 Change the system PIN
A PIN (Personal Identification Number) is
required to register and un-register a handset.
The factory preset PIN is 0000. You can change it
to a unique one of your own. PIN can be up to 8
digits long.
In standby mode:
Press and hold until you see MENU?.
Enter 50. Press and hold until you see
PIN?.
Enter the system PIN. Press and hold
until you see NEW PIN?.
Enter the new PIN. Press and hold until
you see REPEAT PIN?.
Enter the new PIN again for verification.
Press and hold to confirm.
• If PIN is changed successfully, handset will
show SAVED.
Note
The default product PIN code is preset to 0000.
If you change this PIN code, keep the PIN details
in a safe place where you have easy access to
them. Do not lose the PIN code.
5.3.5 Reset your phone
You can reset your phone to factory settings. To
find out what settings are being reset, see
page 18.
In standby mode:
Press and hold until you see MENU?.
Enter 01 if you want to delete all the
memories.
OR
Enter 02 if you want to keep the memories
unchanged.
Base selection Index Number
BASE 1 64
BASE 2 65
BASE 3 66
BASE 4 67
AUTO 68
2
3
4
5
1
2
3
1
2
3
4
5
1
2
3
4
5
1
2
2