Philips SJA9191/17 Caller ID Box User Manual


 
can even associate a recorded name to multiple
callers or telephone numbers. When the
phone rings from any of these numbers, the
recorded name is announced instead of the
number.
While reviewing the call log, you can record a
name to associate with the displayed telephone
number by simply pressing and holding down
the RECORD key. After you hear the “beep”
say the name, then release the RECORD key.
The recorded name will be played back to you.
If you want to re-record it, just hold down the
RECORD key again.
If you’ve just entered a telephone number man-
ually, press the MODE key until the RECORD
NAME mode is displayed. Then press and hold
the RECORD key, wait for the “beep”, and say
the name.
If you want the displayed number to be
announced with a name that has already been
recorded, press the MODE key until SELECT
NAME is displayed. Then press either REVIEW
key until you hear the name you want to use.
Finally press the RECORD key momentarily to
associate the recorded name you just heard
with the number displayed on the screen.
Note: When recording a name, make sure the
Caller ID display shows either the caller’s tele-
phone number or the caller’s telephone num-
16
EN
Getting Started