Filter
Top Products
10 EN
7 Use the headset
Connect the headset to a mobile phone
1
With the mobile phone turned on, press until the LED lights
up, to turn on the headset.
Once turned on, the headset reconnects automatically to »
the last device it was connected to.
If the last connected device is not available, the headset »
tries to reconnect to the second to last device that was
connected to the headset. If it cannot nd this device, it
will look for all previously paired devices in the order of
last usage, until it nds a device to connect to. The headset
stores up to 8 previously paired devices.
If you turn on the mobile phone or its Bluetooth feature after turning
on the headset, connect the headset from your mobile phone’s
Bluetooth menu.
Automatic power saving
If the headset cannot nd any Bluetooth device to connect to in
range within ve minutes, it automatically powers down to save
battery life.
Control your calls
Turn the headset on/off
Press
until the LED turns on/off.
Check battery Hold VOL + and VOL - simultaneously.
> 50%: 1 blue ash
< 50%: 2 red ashes
< 25%: 3 red ashes
Pick up/end a call
Press
.
Adjust Volume Press VOL +/VOL -.
Redial the last number
Press
twice quickly.
Reject a call
Hold
.
Activate voice dialing
Hold
until beep occurs.
Transfer a call to a
mobile phone
Hold
during a call.
Mute the Mic
Press
twice quickly during a call.
Manage 3-way calls
If your mobile phone and network operator support 3-way-calls, you
can manage 3-way-calls via the headset.
To hold the active call and
accept a waiting call
Press
while the 2nd call is
coming in.
To drop the active call and
accept a waiting call
Hold
while the 2nd call is
coming in.
To swap the active call and the
call on hold
Press
during a call.
To drop the active call and
accept the call on hold
Hold
until a beep sound
occurs.
To drop the call on hold
Press
and VOL - until a beep
sound occurs.
To add the call on hold to an
active call
Press
and VOL + until a beep
sound occurs.
LED and sound indication
The red/blue LED ashes alternately. The headset is ready for
pairing.
The blue LED ashes once every 3
seconds.
The headset is connected
to the phone.
The red LED ashes twice every 3
seconds.
The headset is not
connected.
The blue LED ashes once every half
a second.
There is an incoming/
outgoing call.
The blue LED ashes once every
second.
The headset is active on
a call.
The red LED ashes three times and
beeps twice every minute.
The battery is low in
power.
Solid red LED The headset is charging.
The LED is off. The headset is off./Charging
is nished.
The headset beeps every 5 seconds The Mic is muted.