Filter
Top Products
1
Connect
Connect the base station
2
Install
Insert rechargeable batteries and charge
1. Place the base station in a central location near the telephone line socket and
electricity socket.
2. Connect the line cord(s) and the power cable to their corresponding connectors at
the back of the base station.
For 2 line subscriptions, connect the 4-pin telephone line cord (with black cord) to the
black TEL LINE 1/2 phone jack and to the telephone wall jack for line 1. Connect the
second telephone line cord (with gray cord) to the gray TEL LINE 2 phone jack and to
the telephone wall jack for line 2.
If the two phone lines are on one modular wall jack, connect only the 4-pin telephone
line cord (with black cord) to the black TEL LINE 1/2 phone jack and to the telephone
wall jack. (Do not connect anything to the gray TEL LINE 2 phone jack.)
3. Connect the other end of the line cord(s) and power cable to their respective
sockets.
Note
Insert batteries Charge handset for 24 hours
A
B