Filter
Top Products
15
Registration
inform you that the battery is low. If the
battery level becomes exceedingly low,
the phone automatically switches off
shortly after the icon starts blinking and
any function in progress will not be
saved.
1 Place the handset in the cradle of
the charger with the display facing
forward. A beep is emitted if the
handset is placed correctly.
2 The battery icon on the display
blinks during charging.
3 The battery icon becomes
steady when the handset is fully
charged.
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor ranges of the
handset are up to 50 meters and 300
meters, respectively. When the handset
moves beyond the operation range, the
antenna icon will blink.
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
5.4 Remove/Attach belt clip
A belt clip allows you to carry your
handset on your belt.
1 To remove the belt clip, simply pull
the clip away from the handset.
2 To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
5.5 Install optional headset
Your handset may be used with an
optional headset (not included in the box).
To use this feature, insert the headset plug
into the headset jack. Your handset is
ready for hands-free conversations.
6 Registration
6.1 Registering the handset
You must register your handset to the
base station before you can use it. Up to
8 handsets can be registered to one base
station.
The PIN is required before you can
register or unregister handsets.
By default, the PIN is 0000.
Note
Tip
Diameter: 2.5 mm
01GB04C02.fm Page 15 Thursday, November 20, 2008 1:50 PM