Philips SE171 Cordless Telephone User Manual


 
13
Français
EN
Install the handset
Caution
Risk of explosion! Keep batteries away from
heat,sunshineorre.Neverdiscardbatteries
inre.
Use only the supplied batteries.
Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
Chargethebatteriesfor8hoursbeforerst
use.
Warning
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
1 The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, your
hear a docking sound.
The handset starts charging. »
Note
If the handset becomes warm when the
batteries are being charged, it is normal.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium
and low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging completes.
Theemptybatteryiconashes.
The battery is low and needs
recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.