Philips CD685 Amplified Phone User Manual


 
13EN
Charge the handset
Place the handset on the base station to charge
the handset. When the handset is placed correctly
on the base station, you hear a docking sound.
» The handset starts charging.
Note
Charge the batteries for 8 hours before rst use.
If the handset becomes warm when the
batteries are being charged, it is normal.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate the
battery level (full, medium and low).
When the handset is on the base
station/charger, the bars ash until
charging completes.
The empty battery icon ashes. The
battery is low and needs recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name
and number/date and time, signal icon, and
battery icon. If the handset is off the charging
cradle, the display remains for 20 seconds.
Check the signal strength
It displays the link status between
the handset and base station. The
more bars are shown, the better the
connection is.
Ensure the handset is linked to the base
station before you make or receive calls
and carry out the phone functions and
features.
If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
Switch your handset On/Off
Press and hold to switch off the
handset. The handset’s screen turns off.
Note
When the handset is switched off, no call can be
received.
Press and hold to switch on the
handset. It takes a few seconds for the
handset to power up.
English