Philips CD560 Cordless Telephone User Manual


 
9
Warning
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
a The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
b Place the handset to the charging cradle
to power up.
Checking the battery level
The battery icon displays the current battery level.
The battery is full.
The battery is empty.
Charge it.
The handsets turn off if the battery is empty. If
you are on the phone, you hear warning tones
when the battery is almost empty. The call gets
disconnected after the warning.
R
3 Get started
Caution
Ensure you have read the safety instructions in
the “Important” section before you connect
and install your handset.
Connect the charger
1
Connect the output plug of the power
socket to the bottom of the charger.
2 Connect the power socket to a standard
wall outlet.
Install the handset
Caution
Risk of explosion! Keep batteries away from
heat, sunshine or re. Never discard batteries
in re.
Use only the supplied batteries.
Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
Charge the batteries for 24 hours before rst use.
English
EN