Filter
Top Products
20
First ring
If you have subscribed for caller ID service with
your service provider, your phone can suppress
the rst ring before the caller ID displays on
the screen. After the phone is reset, it can
detect automatically if the caller ID service
is subscribed and start to suppress the rst
ring. You can change this setting to suit your
preference. This feature only applies to models
with rst ring support.
Turntherstringon/off
1 Press menu.
2 Select [ADVANCED SET] > [FIRST
RING], then press [SELECT] to conrm.
3 Select [ON]/[OFF], press [OK] to
conrm.
The setting is saved. »
Note
To reset the rst ring status, go to the reset •
menu.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1 Press menu.
2 Select [ADVANCED SET] > [ECO], then
press [SELECT] to conrm.
3 Select the new setting, then press [OK]
to conrm.
The setting is saved. »
» ECO is displayed instead of
in
standby mode
Note
When the • ECO mode is activated, the
connection range between the handset and
the base station can be reduced.
Autoprex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
The maximum length of a detect number is 5 •
digits. The maximum length of an auto prex
number is 10 digits.
Setautoprex
1 Press menu.
2 Select [ADVANCED SET] > [AUTO
PREFIX], then press [SELECT] to
conrm.
3 Enter the detect number, then press
[OK] to conrm.
4 Enter the prex number, then press [OK]
to conrm.
The setting is saved. »
Note
To enter a pause, press and hold • .
Note
If the prex number is set and the detect •
number is left empty, the prex number is
added to all outgoing calls.
Note
The feature is unavailable if the dialed number •
starts with
*
and #.
EN