Philips CD495 Telephone User Manual


  Open as PDF
of 56
 
28 EN
Auto prex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 5 digits. The
maximum length of an auto prex number is 10 digits.
Note
•
This is a country dependent feature.
Set auto prex
1
Select [Menu] > > [Auto prex], then
press [OK] to conrm.
2
Enter the detect number, then press [OK]
to conrm.
3
Enter the prex number, then press [OK]
to conrm.
» The setting is saved.
Note
•
To enter a pause, press and hold .
Note
•
If the prex number is set and the detect number is left
empty, the prex number is added to all outgoing calls.
Note
•
The feature is unavailable if the dialed number starts
with * and #.
Network type
Note
•
This feature only applies to models with network type
support.
1
Select [Menu] > > [Network type],
then press [OK].
2
Select a network type, then press [OK].
» The setting is saved.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Select [Menu] > > [Recall time], then
press [OK] to conrm.
2
Select an option, then press [OK] to
conrm.
» The setting is saved.
Dial mode
Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
 previous next