Filter
Top Products
English
EN 9
Install the handset
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
• Use only the supplied batteries.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
•
Charge the batteries for 8 hours before rst use.
• If the handset becomes warm when the batteries are
charging, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Congure your phone
(country dependent)
1
When using your phone for the rst time,
you see a welcome message.
2
Press [OK].
Set the country/language
Select your country/language, then press [OK]
to conrm.
» The country/language setting is saved.
Note
•
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To re-set the language, see the following steps.
1
Select [Menu] > > [Language], then
press [OK] to conrm.
2
Select a language, then press [OK] to
conrm.
» The setting is saved.
Set the date and time
1
Select [Menu] > > [Date & time], then
press [OK] to conrm.
2
Select [Set date]/[Set time], then press
[OK] to conrm.
3
Press the numeric buttons to enter the
date and time.
Note
•
If the time is in 12-hour format, press to select [AM]
or [PM].
4
Press [OK] to conrm.
Set the date and time format
1
Select [Menu] > H p > [Date & time],
then press [OK] to conrm.
2
Select [Date format] or [Time format].
3
Press / to select [DD-MM-YYYY] or
[MM-DD-YYYY] as the date display, and
[12 Hours] or [24 Hours] as the time
display. Then press [OK] to conrm.
» The setting is saved.