Philips CD485 Cordless Telephone User Manual


  Open as PDF
of 48
 
26 EN
10 Phone settings
You can customize the settings to make it your
own phone.
Name the handset
The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1 Select [Menu] > > [Phone name], then
press [OK] to conrm.
2 Enter or edit the name. To erase a
character, select [Clear].
3 Press [Save] to conrm.
» The setting is saved.
Set the display language
Note
•
This feature only applies to models with
multiple-language support.
• Languages available for selection vary with
different countries.
1 Select [Menu] > > [Language], then
press [OK] to conrm.
2 Select a language, then press [OK] to
conrm.
» The setting is saved.
Set the date and time
For more information, see “Set the date and
time” and “Set the date and time format” “ in
the Get started section.
Sound settings
Set the handset’s ringtone
You can select from 10 ringtones.
1 Select [Menu] > > [Sounds] > [Ring
Tone], then press [OK] to conrm.
2 Select a ringtone, then press [OK] to
conrm.
» The setting is saved.
Set the handset’s ringtone volume
You can select among 5 ringtone volume
levels or [Off].
1 Select [Menu] > > [Sounds] > [Ring
volume], then press [OK] to conrm.
2 Select a volume level, then press [OK] to
conrm.
» The setting is saved.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1 Select [Menu] > > [Sounds] > [Key
tone], then press [OK] to conrm.
2 Select [On]/[Off], then press [OK] to
conrm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1 Select [Menu] > > [Sounds] >
[Docking tone], then press [OK] to
conrm.
2 Select [On]/[Off], then press [OK] to
conrm.
» The setting is saved.
 previous next