Philips CD485 Cordless Telephone User Manual


 
11EN
3 Get started
Caution
Ensure you have read the safety instructions in
the “Important” section before you connect and
install your handset.
Connect the base station and
charger
Warning
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back or the underside of the
phone.
Use only the supplied power adapter to charge
the batteries.
Note
If you subscribe to the digital subscriber line
(DSL) high speed internet service through your
telephone line, ensure you install a DSL lter
between the telephone line cord and the power
socket.. The lter prevents noise and caller ID
problems caused by the DSL interference. For
more information on the DSL lters, contact
your DSL service provider.
The type plate is located on the bottom of the
base station.
1 Connect each end of the power adapter
to:
the DC input jack at the bottom of
the base station;
the power socket on the wall.
2 Connect each end of the line cord to:
the telephone socket at the bottom
of the base station;
the telephone socket on the wall.
3 Connect each end of the power adapter
to (for multi handset version only):
the DC input jack at the bottom of
the extra handset charger.
the power socket on the wall.
English