Philips CD275 Cordless Telephone User Manual


  Open as PDF
of 40
 
34
Tip
When you access the answering machine •
remotely, you are recommended to set the
ring delay to [ECONOMY] mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
The remote access PIN code is the same as •
your system PIN. The preset PIN is 0000.
Change the PIN code
1 Press MENU.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [REMOTE ACCESS] >
[CHANGE PIN], then press [OK] to
conrm.
3 Enter the old PIN, then press [OK] to
conrm.
4 Enter the new PIN code, then press [OK]
toconrm.
5 Enter the new PIN code again, then press
[OK]toconrm.
The setting is saved. »
Call screening
You can hear the caller while he is leaving a
message. Press
to pick up the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the sound quality of the
message
You can adjust the sound quality of the
messages received from the answering machine.
1 Press MENU.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [MSG QUALITY], then
press [OK]toconrm.
3 Select the new setting, then press [OK]
toconrm.
The setting is saved. »
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1 Press MENU.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [RING DELAY], then
press [OK]toconrm.
3 Select a new setting, then press [OK] to
conrm.
The setting is saved. »
Note
Ensure that the answering machine is switched •
on before this feature can be applied.
EN
IFU_CD270-275_05_EN.indd 34 1/5/2010 5:33:02 PM
 previous next