Filter
Top Products
4 SmartNode 4520 & 4110 Quick Start Guide
Figure 3. Displaying the Network Connections window
Figure 4. Displaying the Internet Properties (TCP/IP) Properties window
3. Double-click on Local Area Connection and click on Properties to open the Internet Protocol (TCP/IP)
Properties window (see figure 4).
4. Select Obtain an IP address automatically and Obtain DNS server address automatically options.
5. Click OK to save changes and close the properties windows.
6. Using the included black Ethernet cable, connect the SmartNode RJ-45 Ethernet LAN port labeled ETH0/1
directly to the Ethernet port on your PC (see figure 2 on page 3).
Option 3: Connect the SmartNode console port to your PC
(SN4520 & SN4110). If your PC has an RS-232 serial COM port, you may use it to connect the Smart-
Node Console port. Refer to the SmartNode 4520/4110 User Manual located at www.patton.com/manu-
als/SN4520-4110.pdf for the procedure.