Paradyne 8955 Telephone Accessories User Manual


 
3. Configuration Using the Web Interface
3-14 June 2004 8900-A2-GB20-30
Adding a Slot-to-Slot Cross Connection
Procedure
To create a range of VCCs between specified slots and the SCP card:
1. On the Configuration - Cross Connect screen, click on Create Cross Connect
by Slot. The Configuration - Cross Connect - Slot screen appears.
2. Enter or select the following fields:
Field Description
Start Slot Select from the drop-down list the first slot in a range to
have connections established to the SCP card.
End Slot Select from the drop-down list the last slot in a range to
have connections established to the SCP card. It may be
the same as the Start Slot.
Start Port Select from the drop-down list the first port in a range to
have a connection established to the SCP card. The
range of ports will be applied to all slots selected.
End Port Select from the drop-down list the last port in a range to
have a connection established to the SCP card. It may be
the same as the Start Port. The range of ports will be
applied to all slots selected.
Slot VPI Enter the VPI of this circuit.
Slot VCI Enter the VCI of this circuit.
Segment End Point (Slot) Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This
field determines if the port card will function as an
endpoint for ATM OAM loopbacks. If False, the port card
will loop back a cell only if its location ID matches the
preconfigured location ID. (See Configuring ATM Ports on
page 3-16.) All other loopback cells are passed to the
next segment.
SCP VPI Enter the VPI of this range of VCCs.
SCP Start VCI Enter the first VCI of this range of VCCs.
Segment End Point Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This
field determines if the port card will function as an
endpoint for ATM OAM loopbacks. If False, the port card
will loop back a cell only if its location ID matches the
preconfigured location ID. (See Configuring ATM Ports on
page 3-16.) All other loopback cells are passed to the
next segment.
Upstream Profile Select a profile for upstream traffic.
Downstream Profile Select a profile for downstream traffic.