Filter
Top Products
Using Your 900 MHz Cordless Telephone
36
Switching a call from key telephone to 900 MHz
handset
To switch a call from the key telephone to the 900
MHz handset during an active call:
1. Press HOLD on the key telephone.
2. Press the CORDLESS button on the base
station.
3. Press TALK on the 900 MHz handset.
Note:
• If you are on an active call on the key telephone
and you press the CORDLESS button on the base
station without first pressing the HOLD button on
the key telephone, your call will be disconnected.
• If you are on an active call on the 900 MHz hand-
set and you press the desk button on the base sta-
tion without first pressing the HOLD button on the
key telephone, the transfer between phones is
delayed until the call is completed. (Avoid this
practice.)
• If the TALK button on the handset is pressed while
the base station is switching from Desk mode to
Cordless mode, the base station switches back to
Desk mode.
SELECTING CHANNELS
To change the active channel, press the CHANNEL
button on the handset.