900 MHz Cordless Telephone User Guide 31
Using Your 900 MHz Cordless Telephone
BEFORE YOU BEGIN
• Ensure that your 900 MHz phone has been
installed as described in "Installing the 900 MHz
Cordless Telephone" on page 19.
• Remove the handset from the charging unit
before using the handset.
• Raise the base
station antenna to
the vertical position.
• Ensure that the
"CORDLESS" LED
on the base station
is lit.
Note: When you pick up the
handset and press TALK, you
may see this message
momentarily:
This message disappears when the base station
obtains an open line from the PBX.
PLACING A CALL
1. Press TALK. You will hear a dial tone.
2. Enter the number you are calling.
3. To end the call, press TALK.
Cordless
LED
ACQUIRING
LINK