Filter
Top Products
Direct Dial (M1, M2, M3)
37
For assistance, please visit http://www.panasonic.com/phonehelp
To erase a stored number
1
Press the required Direct Dial
button ({ M1}, {M2} or {M3}).
2
Press {ERASE}.
• To stop erasing, press {3}
(
No key).
3
Press {OK} (Yes key).
• A long beep sounds, the
information is erased, then
“Memory Empty” is displayed.
• To exit the programming mode, press
{EXIT} or wait for 60 seconds.
• When using the Call Restriction feature
(p. 42), you cannot erase a phone number
in the Direct Dial memory ({M1}, {M2} or
{M3}).
• If a pause is required for dialing, press
{PAUSE} where needed. If required, you
can also store {FLASH} in a phone
number. Pressing {PAUSE} or {FLASH}
counts as one digit (p. 38, 40).
Dialing a Stored Number
from the Direct Dial
memory
1
Lift the handset or press
{SP-PHONE/HEADSET}.
2
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
• The stored number is displayed
and dialed.
OR
1
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
• The stored number is displayed.
2
Lift the handset or press
{SP-PHONE/HEADSET}.
• When you press the Direct Dial buttons
continuously, confirm that the first dialing
out have complete, then press the next
button.
• You can dial numbers stored in the Direct
Dial memory ({M1}, {M2} or {M3}) even if
the Call Restriction feature (p. 42) is set.
TS620bk01.book Page 37 Wednesday, May 24, 2006 2:31 PM